|
SUPERBUILD is interchangeable
with the UNIBUILD heavy duty pallet racking and has been designed
to satisfy all the requirements of medium to heavy-duty pallet storage.
Superbuild pallet racking warehouse storage solution is available in the three different frame load options, varying
from 7.5 up to 15 tons.
The closed design of the superbuild racking frame upright provides a stronger section
than that of the standard open "C" profiles used by other pallet racking
manufacturers.
The superbuild racking frames are made from prime quality, certified, high tensile
hot dipped galvanised steel (procedure SENDZIMIR), thus ensuring
a high level of durability. All the structural components on our superbuild pallet racking are made
from high tensile steel, certified according to EN 10204 3.1B.
The beams on the superbuild racking are profiled sections with quadruple flange thickness
at point of maximum stress for a high loading capability. The grooves
on top of the beams are used to locate modular heavy-duty steel
shelf panels, pallet support bars and drum cradles for the storage
of non-palletised or special goods.
The welded beam end connector has five anchor points, three of
them operating in tension and two in compression, providing a better
connection to the upright with increased load capability.
The adjustment of beams at intervals of 50mm facilitates optimum
used space available.
The superbuild racking beams are painted in yellow RAL 1004 (standard colour)
according to the following procedure:
-
Hot wash degreasing and iron phospate pre-treatment;
-
Application of thermosetting powder paint.
-
Curing at a temperature of approx. 240°C in a ventilated
air circulation oven.
|
|
|
| |
|
|
|
